Polyethylene

Construction Tools

• Bostitch
• FASCO
• DuoFast

Blowing Equipment

• Krendl

In Stock:

• 8'x200'
• 9'x200'
• 10'x200'
• 12'x100

Additional sizes can be ordered.

The reinforced polyethylene is a 3 layer composite consisting of two outer layers of polyethylene separated by a middle layer of polypropylene string fiber.The poly product is an effective vapor barrier if the openings (slits) and penetrations made in it for pneumatic installation (blown in) are sealed. If left unsealed it is no longer a vapor barrier but rather it is simply a very strong membrane retaining wall for dry blown in cellulose fiber insulation. The poly must be "lip" stitched (stapled tightly" to avoid pillowing).

Follow the instructions to assure that it is "Drum Skin Tight".

Product Description
BENO-THERM is derived from recycled wood fibre. Because of its natural content, it is a non-polluting, and non-irritant material. Tests have proven this product free of any gas emission whatsoever.

THERMAL PERFORMANCE
With an R value of 3.8/in. at a density of 1.6 lb/cu. ft. on open areas, BENO-THERM provides the highest thermal resistance per unit of thickness of all conventional insulating fibres on the market today.

FIRE RESISTANCE
Over the years, BENO-THERM has been used extensively in many large construction projects not only as an insulation and acoustical material, but also as an excellent fire resistant agent. BENO-THERM meets the CAN/ULC-S703 standards and has demonstrated in laboratory tests its exceptional flame resisting properties and has also proven to be a non irritant product.

Other properties
As a result of the boron compounds included in its formulation, BENO-THERM helps to prevent parasitical and vermin intrusion. It has therefore gained considerable success in its applications in farm buildings.

BENO-THERM is pH controlled and is ideally suited for insulating steel-structure buildings where use of corrosive materials must be avoided.

Versatility
Made of small particle-sized fibres to be spray-applied, BENO-THERM fills every nook and cranny, forming a uniform, thick coating without any gaps. In walls where it is injected at the recommended 3 lb/cu. ft. density according to the BENO-MAT system, it does not settle or sag over the years and improves the structure's air tightness by reducing air leakage.

ACOUSTICAL PROPERTIES
BENO-THERM contains soundproofing properties and proven superior performance. BENO-THERM is injected at 3.0 lb. density per cubic foot in party walls and at 2.5 lb. density into existing ceilings/floors constructions directly through 2 in. holes pierced into the gypsum boards or, in the case of unfinished walls, through a BENO-MAT membrane mesh stapled to the wall frame before installing the closing wall panel.

Test and results
Based on testing done in laboratory and field conditions for various types of walls and floors constructions, BENO-THERM has consistently performed over the years better than other known fibers. Not only has it shown superior sound abatement properties, but also filled cavities more effectively and proved safer for applicators.
These test results are available upon request.

Tests and Standards
BENO-THERM was subjected to the following tests to determine its thermal and flame-resistant properties:

CCMC Report
NATIONAL RESEARCH COUNCIL CANADA
Institute for Research in Construction

CAN/ULC-S13OM
CAN/ULC-S102.2
ASTM C177
ASTM C739
ASTM G1
ASTM C 1338-96

CCMC-09232-L, Ventilated attic (PDF)
CCMC-12307-R, Exterior wall (PDF)
BMEC #93-1-66 (PDF)

• FASCO
  • FASCO Pneumatic Stapler

Model F1B 50-16

• Tool for "50" staples with length from 6 to 16 mm
• Item code: 11081
• Weight: 0,78
• Height: 157
• Magazine Capacity: 110
• Length: 218
• Air consumption: 0,37
• Depth: 42
• Pressure: 4/7
• Modality: SAFETY: MANUAL

• Long and narrow nose design: excellent job visibility
• Rubber comfort grip: non-slip handling and reduction of vibrations and fatigue
• One hand latch: fast reloading and reduced downtime
• Reversible bumper: high durability
• Rear exhaust with muffler: avoids lubricant from falling onto work surface
• Bottom loading magazine: protects internal parts (reduced maintenance)
• Patent pending magazine: no welded parts, for an easy maintenance
  

Compatible fastener
BEA 95 DUOFAST 5000
FASCO 50 HAUBOLD 900
HOLZ HER A NIKEMA 50
OMER 50 PREBENA D
SPOTNAILS 50


Tool for "50" staples with length from 6 to 16 mm

Applications

• baseboards
• boat interiors
• brushes
• carpets and underlay
• case backs
• dust covers
• frame assembly
• garden furniture
• insulation
• kitchen units
labeling
• manufactured houses
• moldings and decorative trims
• picture frames
• remodeling
• shoe making
• sofas
• toys and dolls
• trade shows
• umbrellas
• upholstering
• vehicle panels
  
  

Technical Details (pdf)

• Duofast
• SureShot Model 5020DLAF

"Industrial Strength" SureShot 5020 DLAF

Features

• Double length, bottom load magazine for fewer reloads
• Auto-fire trigger, adjustable up to 1,400 cycles per minute
• Industrial-grade quality for high-volume applications
• Uses same 5008C or 5010C fasteners as the HT-550 hammer tacker
  
  
  
  Applications: Furniture Upholstery, Insulation, Light Wood Assembly, Roofing Paper

Weight: 2 lbs. 10 oz.
Dimensions: 5 13/16"H 13 3/4"L
Fasteners: 5000 Series

Staple Length: 3/16" to 9/16"
Wire Gauge: 20
Wire Size: .050"
Crown Width: 1/2"

Load Capacity: 200

• BOSTITCH
  • Roofing Stapler

Features and Benefits

• Lightweight, durable aluminum frame
• Jam-Free magazine
• Power control valve adjusts power by 30%
• Molded rubber comfort grip designed to last longer
• Reduced height for stapling in tight areas
• Adjustable depth control prevents over penetration of staple
• Rear exhaust conveniently directs exhaust away from user and work surface
• High capacity, top load magazine decreases reload time
• Carbide trip contact surface
• Hardened steel nose with carbide inserts resists wear
• Aggressive wear guards and skid resistant pads
• Carbide inserts in tip for longer life
  

• Height 8",225.55mm
• Length 14",355.6mm
• Width 2-1/2",63.5mm
• Weight 4.7 lbs, 2.13 kilos
• Driving Power 230
• Magazine Capacity 160
• Max. Operating Pressure 120
• Min. Operating Pressure 70
• Operating Pressure 70-120
• Power to Weight Ratio 49
• Thread Fitting Type NPT
• Thread Size 1/4"
  

Application

• Composite shingle roofing
• Sheathing
• House wrap/vapor barrier

Krendl Machine

All Models

See Below Link

Model #425 Blower
All Fiber Airlock Unit

This all-fiber (airlock) unit is preferred as an economical machine by the small professional contractor or do-it-yourself/rental market for all applications of all fibers. (open-blow or spray-on) Designed for low maintenance and high production, the #425 provides larger hopper capacity while offering simple rugged performance.

Material Production Rate

lbs/hr (kg/hr) rating with 100ft. (30.5m.) of 2 1/2" (6.4cm.) hose at 10ft. (3.1cm.) elevation

MACHINE

	w/single 2-stage blower		w/single 3-stage blower
Material	lbs/hrkg/hr		lbs/hrkg/hr
FIBERGLASS	200(91)		300(136)
ROCKWOOL	600(272)		800(363)
CELLULOSE	1100(499)		1200(545)

Product density and variable blowing conditions will affect production rate.
One 3-stage, 12.5 amp blower recommended for maximum performance.

Packages and Options All-Fiber Machines / Electric 425-B Lg.Blower Hardwired (D.I.-120V) Double Input, 12.5 Amp 3-Stage Blower All-Fiber Machines / Electric 425-A Sm.Blower Hardwired (S.I.-120V) Single Input, 8 Amp 2-Stage Blower Wheel Packages W-6-STD #425 (2-6" Wheels)   Wheel Packages W-9-B #425 (2-9" Pneumatic Wheels)

Model #500 Blower
All Fiber Airlock Unit

The compact Krendl #500 all-fiber (airlock) machine offers reduced weight and electrical requirements. With increased portability and the many options available, (i.e., shredder, double blower) the model #500 is a good choice for the small professional contractor who wants to use all fibers with all applications. (open blow or spray-on)

Packages and Options
All-Fiber Machines / Electric	500-A	Sm.Blowers (D.I.-120V)
Double Input, 8 Amp 2-Stage Blower, Includes ELU
All-Fiber Machines / Electric	500-B	Lg.Blowers (D.I.-120V)
Double Input, 12.5 Amp 3-Stage Blower, Includes ELU
All-Fiber Machines / Electric	500-C	Lg.Blowers w/shredder (D.I.-120V)
Double Input, 12.5 Amp 3-Stage Blower, Includes ELU
Recycle Equipment	550-A	Recycle Mach. (110V. - 24VAC control)
Recycle Equipment	550-B	Recycle Mach. (110V. - 12VDC control)
Recycle Equipment	VH550	Vacuum Hopper Assy.
Recycle Equipment	VH550	Vacuum Hopper Assy.
Recycle Equipment	VH550-B	Vacuum Hopper Assy(w/bin level/blast gate)
Recycle Equipment	VH550-B	Vacuum Hopper Assy(w/bin level/blast gate)
Hopper Extensions	543-M-24-A	Hopper Extension Assy f/#500
Wheel Packages	W-5-HD	#500/1000/2000 (Heavy Duty)
Wheel Packages	W-5-STD	#500/1000/2000 (Standard)
Wireless Remotes	354	Wireless Remote

Model #1000 Blower
All Fiber Airlock Unit

The model #1000 all-fiber (airlock) machine provides maximum agitation, hopper capacity and total versatility in a competitively priced unit.